| 0x0050 | Access granted |
| 0x0051 | Access denied, no access to room |
| 0x0110 | Access denied, key overridden |
| 0x0111 | Access denied, key overridden |
| 0x0112 | Access denied, key expired |
| 0x0113 | Access denied, key not valid yet |
| 0x0114 | Access denied, user group blocked |
| 0x0115 | Access denied, no access to room |
| 0x0116 | Access denied, outside access schedule |
| 0x0117 | Access denied, outside access schedule |
| 0x0118 | Access denied, outside access schedule |
| 0x0119 | Access denied, Battery too low |
| 0x011A | Access denied, Door in privacy |
| 0x011B | Access denied, No access according to access schedule |
| 0x0120 | Access denied, door dead bolted |
| 0x0121 | Access denied, door dead bolted |
| 0x0122 | Access denied, status privacy |
| 0x0127 | Access denied, door dead bolted |
| 0x0130 | Error, invalid credential data |
| 0x0131 | Access denied, battery alarm |
| 0x0132 | Error, wrong system |
| 0x0133 | Firmware version: version in payload |
| 0x0134 | Error, invalid credential data |
| 0x0135 | Access denied, battery level is critical |
| 0x0136 | New firmware version: version in payload |
| 0x013B | Unsupported sound |
| 0x013C | Unsupported verification method |
| 0x013D | VSCode interpreter busy |
| 0x013E | VSCode interpreter failed |
| 0x016B | Self ping counter |
| 0x0180 | Parameters sent to the BLE module |
| 0x0181 | Parameters sent to the BLE module |
| 0x0182 | Dormant mode sent to the BLE module |
| 0x0183 | Admin mode sent to the BLE module |
| 0x0184 | Parameters sent to the BLE module |
| 0x0185 | Parameters sent to the BLE module |
| 0x018B | Advertisement mode sent to the BLE module |
| 0x018E | Parameters sent to the BLE module |
| 0x0190 | BLE module enabled |
| 0x0193 | BLE module disabled |
| 0x0194 | BLE initialize failed |
| 0x0195 | BLE handler busy |
| 0x01CA | EXTI counter |
| 0x01D0 | Battery alarm |
| 0x01D1 | Battery level critical |
| 0x01E0 | Access denied, undefined |
| 0x01E1 | User group unblocked |
| 0x01F0 | Access denied, key cancelled |
| 0x01F1 | Access denied, user group blocked |
| 0x0200 | Battery exchanged |
| 0x0201 | Battery alarm |
| 0x0202 | Battery level critical |
| 0x0210 | Door unit restarted |
| 0x0211 | Door unit restarted |
| 0x0212 | Factory reset |
| 0x0213 | Door unit restarted |
| 0x0214 | Door unit restarted |
| 0x0215 | Service tool connected, restarting |
| 0x0220 | System ID set |
| 0x0221 | Authentication key set |
| 0x0222 | Credential master key set |
| 0x0224 | Service port key set |
| 0x0226 | Zigbee key set |
| 0x0227 | Apple wallet master key set |
| 0x0228 | Apple wallet privacy key set |
| 0x0229 | Media binding key set |
| 0x022A | Secret random key set |
| 0x022B | Secondary credential key set |
| 0x022C | Secondary RFID authentication key set |
| 0x022D | Google wallet HCE master key set |
| 0x022E | Google wallet SE master key set |
| 0x022F | Google wallet Response key set |
| 0x0230 | Unlocked using emergency key |
| 0x0231 | Stand Open set |
| 0x0232 | Stand Open Mode set |
| 0x0233 | Stand Open Mode cleared |
| 0x0250 | Unlocked using mechanical key |
| 0x0251 | Locked using mechanical key |
| 0x0252 | Unlocked using mechanical key, battery mode |
| 0x0253 | Locked using mechanical key, battery mode |
| 0x0260 | Passage start time, Stand Open set |
| 0x0261 | Passage open |
| 0x0270 | Unlocked using exit button |
| 0x0280 | Passage time expired, Stand Open cleared |
| 0x0281 | Locked using emergency key |
| 0x0282 | Stand Open time expired, Stand Open cleared |
| 0x0283 | Opening time expired, closing |
| 0x0284 | Passage revoked |
| 0x0285 | Exit Wallox closed, Stand Open cleared |
| 0x0286 | Stand Open cleared |
| 0x0287 | Checking out current guest |
| 0x0290 | Cancel list full, oldest removed |
| 0x0291 | Cancel list cleaned up |
| 0x0292 | Event list cleaned up |
| 0x0293 | Backup card added to cancel list |
| 0x02A0 | Dead bolt thrown |
| 0x02A1 | Dead bolt released |
| 0x02B0 | Door opened |
| 0x02B1 | Door closed |
| 0x02B2 | Door opened |
| 0x02B3 | Door closed |
| 0x02B4 | Door left open too long |
| 0x02B5 | Door opened from inside |
| 0x02B6 | Door opened with force |
| 0x02B7 | The door is manually locked |
| 0x02B8 | Error, manual locking failed |
| 0x02B9 | Error, door was not completely closed |
| 0x02BA | The door is opened in residential mode |
| 0x02C0 | Privacy time expired, Privacy cleared |
| 0x02D0 | Time changed to Daylight Saving time |
| 0x02D1 | Time changed from Daylight Saving time |
| 0x0321 | Writing new credentials finished |
| 0x0330 | Before set time |
| 0x0331 | After set time |
| 0x0377 | Mifare Plus master key set |
| 0x0389 | Desfire master key set |
| 0x0397 | Ultralight AES master key set |
| 0x0398 | Ultralight EV1 master key set |
| 0x03C0 | Zigbee parameter set |
| 0x03C1 | Zigbee firmware upgrade complete |
| 0x03C6 | Zigbee parameter retrieved |
| 0x03C9 | Online connected to parent |
| 0x03CA | Zigbee lost connection with parent |
| 0x03CB | Online enabled |
| 0x03CC | Online disabled |
| 0x03CD | Zigbee end-node error |
| 0x03CE | Zigbee end-node initialize failed |
| 0x03CF | Error, Zigbee online index too low |
| 0x03D0 | Lock has been initialized |
| 0x03D1 | Cancel list has been updated |
| 0x03D2 | Log has been read |
| 0x03D3 | All parameters has been read |
| 0x03E0 | Battery level during start-up: payload is mV |
| 0x03E1 | Battery level under load: payload is mV |
| 0x03E2 | Battery level without load: payload is mV |
| 0x0410 | RMA verification finished - rebooting |
| 0x0411 | RMA verification failed |
| 0x0430 | Gateway connected to cloud |
| 0x0431 | Gateway disconnected from cloud |
| 0x0432 | Gateway not enabled |
| 0x0433 | Error, Gateway communication failed |
| 0x0440 | Error, out of storage space |
| 0x0441 | Failed writing to storage area |
| 0x0442 | Failed to erase storage area |
| 0x0450 | Error, Duplicate zigbee frames |
| 0x0451 | Error, Something went wrong |
| 0x0452 | Zigbee install code successfully set |
| 0x0453 | Disconnected from PAN |
| 0x0454 | Error, Unknown event received from zboss stack |
| 0x0455 | Error, Lost connection with GW |
| 0x0456 | Error, Failed to send message |
| 0x0457 | Zigbee end-device restarted |
| 0x0458 | Error, BLE admin mode failed |
| 0x0459 | Error, BLE message too large |
| 0x045A | Error, BLE FOTA package mismatch |
| 0x045B | Error, FOTA file size error |
| 0x045C | Error, no free buffers |
| 0x045D | Error, FOTA package mismatch |
| 0x045E | Error, healtcheck failed |
| 0x045F | Error, failed to open storage area |
| 0x0465 | LCM start-up finished |
| 0x0466 | First time started |
| 0x0467 | Service port wireless key set |
| 0x0468 | Current LCM Firmware version (version in payload) |
| 0x0469 | LCM Firmware version (version in payload) |
| 0x046A | RCU Firmware version (version in payload) |
| 0x0486 | Loyalty card(s) saved |
| 0x0487 | Access data clean-up |
| 0x0600 | Tamper mode activated |
| 0x0601 | Tamper mode reset |
| 0x0610 | Configuration corrupted |
| 0x0611 | Firmware assert |
| 0x0612 | Firmware download failed |
| 0x0613 | Firmware upgrade failed |
| 0x0620 | Ping from cloud |
| 0x0640 | Datalink to node down |
| 0x0641 | Datalink to node up |
| 0x0642 | Datalink certificate issues |
| 0x0643 | Datalink encrypted |
| 0x0644 | Datalink slow response |
| 0x0660 | Frame power module not charging |
| 0x0661 | Power module disconnected |
| 0x0662 | Battery case removed |
| 0x0663 | Power boost failed |
| 0x8002 | Previous backup key added to cancel list |
| 0x8005 | Backup access granted |
| 0x8007 | Unlocked using power open |
| 0x8100 | Key added to cancel list |
| 0x8101 | Key removed from cancel list |
| 0x8102 | Cancel list reset |
| 0x8400 | Soft parameters reset |
| 0x8401 | Hard parameters reset |
| 0x8800 | Override reset |
| 0x8900 | Set stand open duration |
| 0x8E01 | Access point type set to standard |
| 0x8E02 | Access point type set to entrance |
| 0x8E03 | Access point type set to elevator |
| 0x8F01 | Lock ID set |
| 0xF000 | Restarting to bootloader |
| 0xFFFF | Empty event log |
